How to print on frosted opal acrylic discs
Plastic Sheets Direct offers an in-house printing service which you can use to print logos, images and wording onto.
How to cut frosted opal acrylic discs by hand
To bend most types of acrylic, the process is done by heating the sheet which makes the heated area thermoformable and is then able to be bent into place. This can be done with a heat gun, line bending machine or any heat source within your workshop.
How to bend frosted opal acrylic discs
To bend most types of acrylic, the process is done by heating the sheet which makes the heated area thermoformable and is then able to be bent into place. This can be done with a heat gun, line bending machine or any heat source within your workshop.
How to polish frosted opal acrylic discs
To polish most types of acrylic, fine grit sandpapers are the best option alternating between wet and dry. Using a piece of wet, 800 grit sandpaper in a circular, buffing motion and then repeat with a dry piece of the same sandpaper. Keep alternating between the wet and dry pieces, rubbing for two to three minutes at a time. If it begins to look frosty this is just part of the process and these will disappear during the sanding. Move onto the grade 1200 paper and continue with the circular buffing motions, before drying to area fully with a soft, dry cotton cloth. If you have acrylic polish, this will help the material shine and look as good as new.
How to print on tinted acrylic discs
Plastic Sheets Direct offers an in-house printing service which you can use to print logos, images and wording onto.
How to bend tinted acrylic discs
To bend most types of acrylic, the process is done by heating the sheet which makes the heated area thermoformable and is then able to be bent into place. This can be done with a heat gun, line bending machine or any heat source within your workshop.
How to polish tinted acrylic discs
To polish most types of acrylic, fine grit sandpapers are the best option alternating between wet and dry. Using a piece of wet, 800 grit sandpaper in a circular, buffing motion and then repeat with a dry piece of the same sandpaper. Keep alternating between the wet and dry pieces, rubbing for two to three minutes at a time. If it begins to look frosty this is just part of the process and these will disappear during the sanding. Move onto the grade 1200 paper and continue with the circular buffing motions, before drying to area fully with a soft, dry cotton cloth. If you have acrylic polish, this will help the material shine and look as good as new.
How to print on fluorescent acrylic discs
Plastic Sheets Direct offers an in-house printing service which you can use to print logos, images and wording onto.
